Home › Forums › General Weta Stuff › Weta Twin Tiller Extensions › Reply To: Weta Twin Tiller Extensions
Weta Marine have now produced a Twin Tiller Extension Kit
The benefit of this kit is that it doesn’t require additional hardware stuck on the boat for the tiller rest to prevent the lazy tiller extension from dragging in the water – the bungee cord holds the tiller on the tramp when not in use and the steel ring slides down the pole when you use it so you have full articulation. It also helps to centre the tiller during the tack.
The twin tiller extension kit includes:
-
1 x two piece tiller extension with universal joint (two piece makes shipping by mail possible now!)
-
2 x stainless steel rings
-
2m 3mm bungy
-
1 x Round tiller adapter
-
2 x 50mmx4mm bolts and nuts
-
4 x round stoppers
-
New tiller end plug
Available now through your local dealer.
TWO TILLER EXTENSION BASES BOLTED TOGETHER WITH TWO 50MM X 4MM BOLTS
3MM BUNGY TIED TO STAINLESS RING USING PLASTIC BALL ON END OF BUNGY