Home Forums General Weta Stuff Go Pro Mount

Viewing 1 reply thread
  • Author
    Replies
    • #144
      Avatarwetaz904
      Participant
      Up
      0
      Down

      du-darr! nice try, but fail!
      mount1

      image 2

      easy way to insert images
      1. enter text, then hit submit
      2. in the top right of your new post click Edit
      3. click the img button, insert address of image

      • This reply was modified 7 years, 3 months ago by Avatarwetaz904.
    • #146
      Avatarwetaz904
      Participant
      Up
      0
      Down

      for some reason image 1 did not appear!

      image 1

    • #149
      AvatarWetanuff 863
      Participant
      Up
      0
      Down

      Hmm, Wetaz can not only can point higher but also navigate thru forum mysteries with pizazz – thank you for adding to my technical data bank.
      The second image of the yellow transom should have a title and comment with words to the effect of Grip ties around pipe and transom have been removed. I also use a shock cord attached to the aft anchor point and around the base of the pipe to make the Go Pro mount very stable.
      The first photo should be clear and shows the flattened pipe which corresponds to the transom dims. I used a butane flame to soften. The softening needs a little patience and a good eye to make sure both flats are parallel.

      • This reply was modified 7 years, 3 months ago by AvatarWetanuff 863.
    • #151
      AvatarWetanuff 863
      Participant
      Up
      0
      Down

      Not sure what happened with pic #1
      Go Pro plastic pipe mount

      Hope my experimenting now works!

      • This reply was modified 7 years, 3 months ago by AvatarWetanuff 863.
Viewing 1 reply thread
  • You must be logged in to reply to this topic.